Category Archives: Motorola

Low Cost Digital Radios for Business – CP200d, CM200d, CM300d

Posted on by
Reply

Motorola MOTOTRBO CP200d DMR Digital RadioMotorola Solutions Upgrades Popular Commercial Tier

The most popular two-way radios for business now support DMR digital voice communications with advanced features. The CP200d, CM200d, and CM300d can be ordered with both analog/digital operation or analog-only with future upgrade capability. They are compatible with other MOTOTRBO radios but are limited to conventional voice features. They will also support dual-capacity direct mode meaning you can have two simultaneous conversations on a single channel without a repeater.

CP200d batteries and chargers are backward compatible but2 Pin Audio Connector for CP200d audio accessories have been optimized for use with digital. Motorola’s new upgraded audio accessories are marked with a symbol on the 2 pin connector.

Improve Coverage with CM200d and CM300d with Display

MOTOTRBO CM200d Front ViewBase, mobile, and control station operation is now possible in VHF (136-174 MHz) with 25 and 45 watt versions. UHF band will be released later this year. Both the CM200d and the CM300d support 99 channels, repeater/talkaround, and MOTOTRBO CM300d Displayvoice announcement.

The CM300d has an alpha-numeric display and two additional programmable buttons.

DMR Digital Radio Choices Slow Analog-Only Sales

The CP200d, CM200d, and CM300d are included in the “Buy 6” August Promotion that ends this month. Receive $185 from Motorola when you purchase six radios on the same invoice.

CP200 analog-only sales slowed significantly since the introduction of the XPR 3300/3500 and Vertex Standard EVX-530 series. Now it appears there is an even easier migration for commercial customers requiring basic voice communications to migrate to DMR. The most rugged business radio for the past ten years just got a new life.

MOTOTRBO CP200d Specs and Data Sheet   MOTOTRBO CM200d CM300d Specs

Why Digital is Better    CP200d Accessory Catalog

MOTOTRBO Digital CP200d Banner

New RLN6500 MOTOTRBO Bluetooth Kit Replaces HK200

Posted on by
Reply

MOTOTRBO RLN6500 Bluetooth Accessory KitMotorola Solutions recently cancelled pending HK200 Bluetooth headset orders after running out of stock. The recommended replacement is the new RLN6500 MOTOTRBO Bluetooth Accessory Kit. The RLN6500 has a comfortable swivel earpiece connected to a pod with clothing clip.

The new design provides a more professional appearance and prevents others from thinking your employees are on their cell phones. Additional earpiece styles will be added in the future.

RLN6500 ChargerThe RLN6500 provides enough battery life for a full 8-10 hour shift unlike most cellular style Bluetooth headsets.

Included is a compact 120V AC charger with cradle for quick and easy charging for the next shift.

Designed for MOTOTRBO DMR Bluetooth Enabled Radios

The RLN6500 is designed to be used with MOTOTRBO Bluetooth enabled radios including the SL 7550, XPR 5350, 5550, XPR 7350, 7550. It is also compatible with XPR 6100, 6300, and 6500 series radios using the PMLN5712 adapter.PMLN6397 Replacement Swivel Earpiece and In-line Mic

It is easy to share among employees with extra PMLN6397 earpieces with in-line mic (pack of 3). The earpiece has a antimicrobial coating for healthcare applications.

Once paired, the headset will reconnect with the radio the next time it is turned on. It is not compatible with the PMLN5993 Bluetooth adapter with touch pairing so you will need to keep it paired with the same radio. The RLN6500 is not compatible with cell phones so you are less likely to lose them due to theft.

Lower Cost Alternative for MOTOTRBO Bluetooth Audio Accessories

The RLN6500 is priced lower than the Operations Critical NNTN8295 wireless earbud with pod and the NNTN8125, NNTN8126 earpieces.

Plantronics-85550-01 M50For those who need a HK200 replacement with long battery life that will also pair with a cell phone, we recommend the Plantronics M50 85550-01.

It has standard Bluetooth 3.0, provides 9-11 hours of typical use, and uses a micro-USB charger connector.

For more Motorola Bluetooth accessories download the Operations Critical MOTOTRBO Wireless Accessory Catalog.

Over-the-Air Programming Steps for Motorola DTR Digital Radios

Posted on by
3

Written by Jeremy Byler, CETsr

How to Remotely Add or Update a DTR Radio Contact to your Fleet

Motorola DTR650 License Free RadioMotorola DTR650 digital radios can be programmed with a unique ID so other users can identify the person transmitting. Most of our customers request that we program their radios with employee names or job functions. This is helpful during emergencies, call alerts, and one-to-one communications.Info Displayed on DTR

When an additional radio is purchased, replaced, or updated the digital ID must be programmed in all of the existing radios. This is easily accomplished using the DTR650’s over-the-air programming feature.

All DTR Radios Must Be Turned “ON” and In Range

After the new radio is programmed using Motorola’s DTR CPS software and programming cable, begin by inserting the battery and connecting the antenna. All radios must be powered ON and within range of the new DTR for programming to be successful.

Use Cloning Mode to Add Contacts Wirelessly

To place the new radio in cloning mode a series of button presses is required. Refer to the picture for button locations and follow the steps below:DTR Radio Button Labels

  • Hold down the “Home” button and press the PTT (push-to-talk) button three times
  • Press the “Left Option” button
  • Press the “Up Arrow” button
  • Press the “Right Option” button
  • Hold down the “Home” button and press the PTT button three times
  • When done correctly screen will display cloning mode

DTR Radio Cloning Menu Mode

From Cloning Menu Choose “Send Contact”

When the DTR is in cloning mode, scroll to the “Send Contact” and choose the contact you want to send to the other radios per steps 1-3 below.Steps 1-3 Adding DTR Contacts Remotely

 Select the Contact You Want to Send to the Other DTR Radios

Steps 4-7 shows how to scroll through the list of radio contacts and change to the one you want to send to the other radios in your fleet.

Steps 4-7 Add DTR Contacts Remotely

Press “Program” and “Go” to Finish the Cloning Operation

Steps 8-11 include selecting the target radio or radio group and sending the info wirelessly using the “Program” and “Go” soft buttons.

Steps 8-11 Add DTR Contacts Remotely

After operation is completed, a status message will appear. It will either display “Successful” or show a list of radios that failed. A radio will fail if it is powered off or is out of range.

If only a single radio needs to be updated, choose the name of the radio that needs to be updated instead of the group. Once this operation is successfully completed and all your radios have been updated with the new radio’s contact information, your DTR system will communicate properly.

For more information download the Motorola DTR Series User Guide and the Generation 3 DTR650 Product Training presentation from Motorola Solutions.

Firefighter Training Video – “Say It Loud and Clear”

Video

1

Best Practices Developed by Motorola and the IAFC

Motorola BatwingsMotorola and the International Association of Fire Chiefs (IAFC) developed a 15 minute training video to review best practices when using mission-critical 2-way radios for fireground operations. The training applies to all radio brands and models.

IAFC SealThe video shows typical scenarios how a firefighter can minimize background noise and maximize voice communications intelligibility. Whether you use analog, digital, 800 MHz, or VHF/UHF – the tips to improve audio quality all apply.

New MOTOTRBO INC Microphones Designed for Use in Extreme Noise

Posted on by
Reply

NNTN8382 and NNTN8383 INC MicsMotorola is now shipping their Industrial Noise-Cancelling (INC) remote speaker microphones for MOTOTRBO XPR 6000 and 7000 series DMR radios. The new mic speaker is 25% louder and uses dual microphone noise-cancellation technology found in high tier public-safety audio accessories.

There are two styles available: NNTN8383 includes a 3.5mm threaded jack located on the 6 foot coiled cord and the NNTN8382 IP57 submersible model without the jack.

Both RSM’s use IMPRES technology to communicate with XPR MOTOTRBO series including the 6100, 6300, 6350, 6550, 6850, 7350 and 7550 models. The mics have a 4 digit date code under the clip and carry a 12 month warranty.

Easy to Clean When Working in Dirty EnvironmentsMOTOTRBO INC Mic Being Cleaned

Dirt and debris that clog other mics can prevent the user from being heard and cause repeat transmissions. The INC remote microphones can be cleaned with soapy water and a scrub brush.

Use a High-Capacity Battery When Using INC Microphones

Battery Life when using NNTN8383, NNTN8382The INC microphones use the radio battery to power the extra-loud, one watt speaker and microprocessors that cancel the background noise.

We recommend using the larger 2,150 mAh IMPRES radio battery if you work long shifts, use scan to listen to multiple channels, or transmit more than normal.

NNTN8383 Requires 3.5mm Threaded Receive-only Audio Accessories

If using the NNTN8383 with the audio jack, make sure you use a 3.5mm threaded accessory plug. Some of the popular threaded receive-only accessories that are compatible include the RLN5313, BDB6726, and the BDN6781. The unthreaded receive-only RSM accessories with the short cords will not work. 

Download Motorola MOTOTRBO INC NNTN8383 NNTN8382 Product Spec Sheet

Rehoboth Beach Patrol Upgrades Lifeguard Communications

Posted on by
1

Rehoboth Beach, DE

Thousands of visitors pack the narrow strip of sand at Rehoboth Beach each summer resulting in hundreds of urgent events including lost children, water rescues, and medical emergencies. Rehoboth Beach Patrol, led by Captain Kent Buckson, has been the first responder team for the resort since 1921.

Rehoboth Beach Patrol LogoNot that long ago, most beach patrols relied on semaphore flags for mission-critical communications. The visual messages took several minutes to “transmit” vital information along the entire beach. Analog 2-way radios improved communications but still lacked features required for public-safety.

Starting Memorial Day Weekend, Rehoboth Beach Patrol will improve their Motorola MOTOTRBO DMR XPR 6550 digital radio coverage by adding  a XPR 8400 repeater located on top of the City’s water tank. This will provide better radio-to-radio communications especially during emergencies.

Submersible MOTOTRBO Digital 2-Way Radios Improve Beach Safety

Motorola XPR 6550Motorola MOTOTRBO digital XPR 6550 hand-held radios are rugged enough to provide reliable communications from each lifeguard stand along the crowded shoreline. The XPR 6550 carries a IP57 submersible rating that protects the internal electronics from the harmful effects of sand and salt water. A bright orange silicone grip case provides additional protection and makes it easier to locate if dropped in the sand or surf.

Internal text based information from Headquarters is received on the XPR 6550’s rugged screen reducing the need for voice communications. A press of the orange button alerts the team when an emergency occurs. The radio is programmed with an identifier that provides precise location information when backup is needed.

Our Magnum Electronics team is proud to have been given the opportunity to design, install, and provide ongoing support for their next generation communications system that enhances public-safety on the beach.

Motorola Announces XTS 5000 and XTL 5000 P25 Radio Cancellation

Posted on by
Reply

Last day to order XTS5000 is 10-31-13Motorola made it official today with their cancellationXTL5000 Last day to order 10-31-13 announcement of the XTS 5000 and XTL 5000 P25 radios. The last day to order is October 31, 2013.

XTS and XTL accessories will continue to be available with depot repair support until the end of 2018.

New and Improved APX P25 Radios are the Replacements for XTS/XTL

New APX P25 Portables are the replacement for XTS XTL radiosThe APX platform has been shipping for about 2 years slowing XTS/XTL shipments. Public-safety agencies prefer the new APX P25 radios because of their durability, audio quality, and advanced features.

A full complement of audio and charging accessories are available.

Motorola Trade-in Promo Reduces APX price up to $450

Motorola has a $450 trade-in offer in effect until June 26, 2013 if you purchase a new APX. This discount is in addition to any special contract pricing. For details call your authorized Motorola manufacturer’s representative.

New South Bowers Fire Rescue Airboat Installation With David Clark Wireless Headsets

Posted on by
Reply

South Bowers Fire Rescue Airboat

South Bowers Volunteer Fire will now perform emergency rescues in the Kent County salt marshes with a new airboat equipped with David Clark wireless mission-critical communications. The system will provide hands-free, wireless intercom for the crew and will also integrate with the Delaware 800 MHz statewide first-responder system.

David Clark 9900 Wireless Intercom and Motorola APX 7500 Radio Integration

David_Clark_LogoThe new David Clark 9900 Series wireless gateway system is weather tight, rugged, and designed for marine use. It easily integrates with a Motorola APX 7500 700/800/VHF P25 capable radio and will connect to a 3800 wired system if needed.

David Clark 3800 Wireless Intercom

Wireless Intercom System Components, Key Features, and InstallationH9940 Headset

The South Bowers David Clark system uses four H9940 dual muff, behind-the-head style headsets each with a 9910-BSW wireless belt station with VOX. This design provides hands-free intercom for the crew and the ability to monitor radio traffic from the boat’s APX 7500 radio. The belt station has a PTT (push-to-talk) switch for transmitting. The U9922-38 wireless gateway acts as a repeater and provides up to 300 ft range using clear DECT based technology.

David Clark A99-04CRG ChargerThe belt stations use 40688G-90 rechargeable batteries that are removable and last approximately 24 hours after a full charge. A A99-04CRG 110V AC charger will hold 4 batteries and takes about 3-4 hours when fully depleted. David Clark has several 9900 Series headset styles a full range of accessories, interface cables, and antenna choices. The APX radio uses an 05 control head and motorcycle options for improved outdoor performance.South Bowers Airboat Installation

A weatherproof NEMA box was added for better protection and installation was completed at our Dover service facility on Horsepond Road. The David Clark 9900 wireless headset intercom system is an excellent choice for fire/ems, military, and marine applications. Our thanks to South Bowers Station 57 for the opportunity to provide the first David Clark 9900 Series intercom in Delaware.

South Bowers Volunteer Fire Delaware Airboat

Motorola IMPRES Battery Tips and Charger Indicator Lights

Posted on by
71

Proper IMPRES Battery Care Starts With Initialization

Motorola IMPRES ChargerA Motorola IMPRES battery must be initialized by an IMPRES charger the first time it is charged. This process is indicated by a STEADY YELLOW light on the charger indicator (the same as if the battery were reconditioning). The process is automatic, includes an initial reconditioning of the battery, and begins charging upon completion of this process.

This process requires approximately 12 hours depending on the capacity. Do not remove the battery from the charger until the STEADY GREEN light is on.

IMPRES Indicator Light Chart with Explanations

Motorola IMPRES Charger Light Indicators

IMPRES Automatic Battery Conditioning

Motorola IMPRES Adaptive Chargers, when used in conjunction with a Motorola IMPRES battery, have the ability to determine the appropriate time to recondition the battery. When an IMPRES battery is properly inserted into the charger, the charger determines if it is appropriate to recondition the battery. If the battery needs reconditioning, the charger automatically indicates a STEADY YELLOW.

This process may take up to 12 hours to complete, depending upon the state of charge and capacity rating of the battery when it is inserted. It is important to note, for this process to be effective, the IMPRES battery must be allowed to complete the recondition/recharge process. Leave the battery in the charger until the charger indicates a STEADY GREEN. At the completion of the recondition cycle, the charger automatically recharges the IMPRES battery.

How to Terminate the IMPRES Conditioning Process

At any time during the reconditioning process of a Motorola IMPRES battery (STEADY YELLOW indication), reconditioning may be terminated by removing and reinserting the battery back into the charger within 5 seconds. This causes the charger to terminate the reconditioning process and begin the charging process. The charger indicator changes to a STEADY RED. The charger will attempt to recondition the battery at the next battery insertion.

Manually Initiating the IMPRES Reconditioning Process

Within 2-1/2 minutes of the initial insertion of an IMPRES battery (STEADY RED indication), remove and reinsert the battery within 5 seconds to manually force reconditioning to occur. The charger indicator changes from a STEADY RED to a STEADY YELLOW. This forces the charger to recondition and automatically recharge the battery. This is a useful feature to have when IMPRES batteries have been in storage for several months or longer. Two or three manual recondition cycles may be required to rejuvenate the batteries, due to long term storage conditions.

Complete List of Motorola KVL Encryption Keyload Cables and Adapters

Posted on by
Reply

Motorola KVL 3000 and 4000 Cables

KVL 3000/4000 Keyload Interface Cables and Adapters

Most Motorola military and law enforcement 2-way radio communications uses an encrypted algorithm for secure voice messages. The encryption key is inserted in the radio using a KVL 3000 or KVL 4000 as shown. The basic interface cable is the Motorola TKN8531 and an adapter specific to the radio model. XTS 5000/2500 series portable hand-held radios require a NTN8613 adapter. APX 7500/6500  and most XTL 5000/2500 mobile radios need the HKN6182.

APX 7000/6000 series use the WPLN6904 cable that does not require an adapter.

OTAR and Radio Authentication Cables 

For systems using OTAR (over-the-air-rekeying) or radio authentication, the KVL uses a different set of cables without the need for adapters. APX, XTL, and Astro Spectra mobile radios use the HKN6183. XTS portable radios require the RKN4106 and APX 7000/6000 portables use the WPLN6905 cable.

For a complete list of KVL 4000 cables, adapters, and accessories, see the charts below.

Motorola KVL Interface Cables and Adapters

Optional accessories for the KVL 4000:

KVL Optional Accessories