JPS NXU-2A RoIP Network Extension Unit Improved and Upgraded to NXU-2B

IP 2-way Radio Gateway

The popular JPS NXU-2A network extension unit has been improved and will begin shipping next month as the NXU-2B. It uses the same cabinet and is fully functional in systems with the older NXU-2A. The new model no longer uses potentiometers so level setting can be accomplished remotely using a browser. This eliminates a costly service call to the transmitter site.

Improve handheld radio coverage using internet

Another big change is the 15-pin audio interface connector has been redesigned to allow any of the standard JPS radio cables to be connected directly to the unit. The NXU-2A required the included crossover adapter to work but half the time it was left in the box.

In addition to solid state keying, the NXU-2B will have a PTT relay and the ability to interface to transmitters via 600 ohm balanced audio.

Below is a video showing the capabilities of the NXU network extension unit.

Magnum Electronics has been an authorized JPS Interoperability reseller since 2005 and support the entire JPS product line. Contact us at our Dover, Delaware office during normal business hours. The phone number is (302) 734-9250 or use the form below.

JPS RSP-Z2 Gateway Provides Simple Patch for Radio System Interoperability

The RSP-Z2 dual-channel gateway from JPS Interoperability Solutions located inJPS Interoperability Solutions Raleigh, NC allows a pair of 2-way radios, IP connections, or a radio and IP connection to be patched together. There are no recurring costs and the RSP-Z2 supports 2/4-wire interfaces, SIP, RTP, and RoIP protocols. JPS offers factory-built cables with connectors for almost every analog and digital radio model ever manufactured.

Easy Solution to Connect Your Existing Radios with WAVE TLK 100 LTE Devices

LTE Wi-Fi Two-Way Hand-held Two-Way RadioUsers with a large number of existing on-site radios can easily interface with Motorola WAVE OnCloud TLK 100 LTE devices that provide nationwide coverage. All you need is the RSP-Z2 and interface cables for the TLK 100 and your on-site radio.

The TLK 100 and your radio would be dedicated and can not be used for dispatch. Interoperability is automatic on the channels selected on each dedicated radio. Coverage for the on-site donor radio would be limited by the antenna system or repeater.

JPS RSP-Z2 Interoperability Gateway Data Sheet

JPS RSPZ2 Installation and Operation Guide

JPS RSPZ2 Field Optimization and Troubleshooting Guide

Visit our website for JPS ACU series interoperability gateways, SNV-12 voters, NXU-2A network extension unit, and interface cables. Magnum Electronics has been an authorized JPS Dealer since 2006 and provides technical support services if needed.

Interoperability Gateway Devices Improve In-building 2-Way Radio Coverage

ACU-M Gateway Improving Radio CoverageJPS Interoperability Solutions has a long history of mission critical radio communications connectivity. The JPS ACU-M interoperability gateway console is an excellent tool to quickly improve in-buildingRaytheon ACU-M Interoperability Console coverage for first responders. It is compatible with the JPS ACU-1000 and the ACU-T.

The JPS ACU-M provides interconnection with up to four different 2-way radios, optional 2 VoIP channels, and a local operator handset. Plug-in cables are available for virtually every 2-way radio, satellite, and cell phone in use. The ACU-M can be networked and managed remotely using a computer with the included graphical user interface software.

Set up ACU-M as a Portable Repeater for Communications in Basements

The JPS ACU-M can be installed in a first-arriving command vehicle or waterproof carry case. Below grade basements that prevent RF penetration can be improved using long radio interface cables connected with the ACU-M gateway repeater. By attaching a portable radio to the end of a very long radio interface cable, the radio can be lowered into a tunnel or RF-blocked structure to provide a means of routing the signal in and out of the structure.

Use WiFi Network with ACU-M for Long Distance Radio Interoperability

Using the ACU-M’s VoIP’s option, a radio can be connected using WiFi or an ethernet Raytheon NXU-2A Network Extension Unitbridge and a NXU-2A radio interface. The JPS NXU-2A is a device that converts VoIP/RoIP into audio signals compatible with the remote radio. It uses the same plug-in radio-specific cable as the ACU-M.

ACU-M using WiFi and NXU-2A

ACU-M Easy to Deploy – Simple User Interface

The ACU-M is pre-programmed with factory optimized settings for most radio models and manufacturers. Just connect up to four radios with the proper cables and you will be operational in minutes. Touch controls and indicator lights make it easy to patch nets quickly. Remote control software is included too and can be installed on a connected laptop if you prefer.

ACU-M Control Panel and Indicator Lights

6/1/16 Update: Raytheon closed the JPS division on 1/29/16 after many years of providing interoperbility solutions. In April, the assets were purchased by Don Scott, one of the original founders of JPS. Key staff and support personnel returned and operations are returning to normal.