Motorola LEX L11 Software Upgrade Instructions For Verizon Devices

Rugged LTE FirstNet DeviceThe Motorola LEX L11 LTE public-safety smartphone designed for AT&T and FirstNet is now compatible with the Verizon network. All you need to do is follow the software upgrade instructions below.

The LEX L11 software update requires an active Verizon SIM. We tried to upgrade a LEX without a VZW SIM and were not able to complete the update. Evidently, the software update is provided by the carrier.

Remote Control Your APX Radio With BluetoothThe Android based LEX L11 is purpose-built for mission critical public-safety communications. It pairs with the APX 8000, APX 8000XE, APX 7000, APX 7000XE, APX 60000, and APX 6000XE series (Bluetooth enabled) radios and can be used as a wireless remote speaker-microphone.

LEX L11 Software Upgrade Instructions During Initial Setup

Software step-by-step Upgrade Instructions

LEX L11 Software Procedure After Initial Setup

The LEX L11 software update requires an active Verizon SIM. We tried to upgrade a LEX without a installing a VZW SIM and were not able to complete the update. Evidently, the software update is provided by the carrier.

1. Power on Phone
2. Insert Verizon SIM
3. Connect to WiFi network
4. Once device connects to WiFi, the device should receive the indication that a new SW version is available
5. Accept Download / Install
6. After device reboots; verify the new SW version – SW version should be R01.00.40 (in Settings/About Phone/ – see bottom Build Number)

Download Motorola LEX L11 Software Upgrade Document for Verizon Devices

To receive a LEX L11 quote contact us at our Dover, Delaware sales and service facility at 302-734-9250 during normal business hours M-F 8-5pm. Or you can use the form below:

Cel-Fi Smart Signal Boosters Improve 3G/4G/LTE Cellular Coverage In Buildings and Vehicles

Cellular Smart Signal Boosters

Cel-Fi by Nextivity is a Carrier approved cellular booster product family designed to improve 3G/4G/LTE voice and data. Basically, they amplify a weak (at least one bar) carrier signal using a donor antenna and distribute it indoors using a server antenna. They are sometimes called BDA’s (Bi-Directional Amplifiers).

Unlike cell boosters in the past, Cel-Fi uses advanced smart technology that minimizes interference and desense.They provide a bigger coverage footprint indoors by amplifying signals up tp 100 dB. Cel-Fi is designed to improve a single Carrier but can be co-located for a second Carrier without degradation.

Cel-Fi smart boosters are simple plug and play solutions with internal antennas, packaged bundles for vehicles or small buildings, and scaleable DAS systems for facilities up to 200,000 sq ft.

Easy Install Cel-Fi Duo+ and Pro for Small Offices Up to 15,000 Sq. Ft.

The Duo+ and Pro products have internal antennas and no cables to connect. All you need is at least one bar of 4G LTE signal. The Duo+ is available for Verizon or T-Mobile and the Pro is designed for AT&T users. This solution is for indoor use only and takes a few minutes for installation.

Rugged Cel-Fi GO X and GO M Use External Antennas for Buildings and Vehicles

The Cel-Fi GO X and GO M are housed in a NEMA 4 Rated weather resistant enclosure for indoor or outdoor environments. They use external antennas to provide more flexibility and include Carrier Switching. Using the free WAVE app you can reprogram the GO X and GO M for a different Carrier if needed. It can also be changed from vehicle use to building and vice versa.

The Cel-Fi GO Series require more planning for building solutions. Antenna choices, splitters, and cable lengths will factor in the design. As a certified Cel-Fi reseller, our employees receive extensive training in pre-sale design and installation.

We offer Cel-Fi GO M bundles with antennas for moving vehicles. These are optimized for service vans, command vehicles, and RV’s. The kits are complete and optimized for Verizon or AT&T. There is also the Cel-Fi GO RED that boosts AT&T FirstNet Bands 12 and 14.

Cel-Fi Quatra 1000 & Quatra 2000 Scalable DAS In-Building Coverage Solutions

The Cel-Fi Quatra series is an easy-to-deploy, scalable (DAS) distributed antenna system for buildings up to 200,000 sq ft. It operates in off-air mode or can be integrated with carrier small cell equipment and operated in distributed small cell mode, creating a Supercell. The Quatra 1000 supports a single Carrier and the Quatra 2000 supports dual Carriers.

About 80% of all cellular traffic is used indoors or in vehicles. It you have weak in-building or in-vehicle coverage, Cel-Fi by Nextivity is the recommended solution. If you have questions or need a formal quote, contact our Dover, Delaware office at 302-734-9250 during normal business hours.