Boston Leather has designed a custom carrying case for each Motorola APX radio model including the option to use a strap or belt loop. Their standard cases are plain black full grain leather with silver hardware but almost anything is possible for custom orders.
It is important to know which battery you are using on your APX 8000, 7000, and 6000 because a longer case is need for the high-capacity batteries. There are also 3 different APX configurations available. This article provides choices for each Motorola APX model radio when used by fire, ems, or law enforcement professionals.
Motorola APX Battery Sizes For Boston Leather Cases
Motorola APX 1.5 models only have a top display. The 5611RC15-1 holder is compatible with standard batteries and the 5611RCXB-1 is for extended length high-capacity batteries. There is also the original 5618RCNW-1 that was designed for the APX 6000 Model 1.5.
The 5481RC-1-E universal case is also a good choice if you want access to the top half of the radio.
Motorola APX 8000, APX 8000XE, APX 6000, APX 6000XE Model 2.5
The model 2.5 has a top and side display with a limited keypad. The 5611RC-1 is designed for standard length batteries and has D-rings for a strap. The 5611-1 is the same case without the D-rings.
APX 6000/8000 Model 2.5 radios using extended batteries require the 5611RCXB25-1. If you prefer a radio holder that protects the side display choose the 5611RCNW-1. It has the sides open for larger audio connectors.
The model 3.5 has a top and side display along with a full keypad. The 5611RC35-1 has a larger front cutout for access to the entire keypad and is compatible with standard size batteries. This case is also compatible with the SRX 2200 military radio.
Extended battery users should choose the 5611RCNW-1 no window holder.
Motorola APX 7000, APX 7000XE Boston Leather Radio Holder Choices
There are 3 Boston Leather radio holder choices for APX 7000 models.The standard holder for non-XE models with short batteries is the 5613RC-1. Rugged XE 1.5 models with standard batteries will need the 5612RC-1.
There is also a custom holder for the APX 7000 with an extended battery. The 5613RCXB-1 has cutouts and custom designed for the model 3.5 with full keypad and side display.
The 5701RC-1 is the recommended holder for the APX 4000. It includes cutouts for the display, full keypad, and microphone connector. This case can be worn on a duty belt and ordered without clips.
There is also a slightly different design 5701RCHW-1 with a high window.